Installing with screws

Opening the mounting plate by hands

1. Detach the mounting plate from the smoke alarm. You can detach it by pushing the plate with fingers and turning it counterclockwise. If its tight, you can use e.g. a pen for help.

Mark the places for holes

2. Make marks for screw holes.
You can direct your smoke alarm with the aid of the direction arrow. The direction arrow should point in the same direction as the sides of the smoke alarm.

Drilling the holes

3. Drill holes for the screw anchors.
Please use 6mm drill bit.

Place the screw anchors into holes

4. Place the srcew anchors into the drilled holes.

Place the mounting plate on ceiling

5. Place the install plate to the ceiling.

Drilling the screws

6. Insert and drill the screws in place.
You can direct your smoke alarm with the aid of the direction arrow. The direction arrow should point in the same direction as the sides of the smoke alarm.

Placing the smoke alarm

7. Press Kupu against the installation plat and turn it clockwise.
You can make small changes in the position of the smoke alarm by turning it a few degrees in the direction you want.

Smoke alarm on ceiling

8. Installation is done.
Congratulations - you have made your home a safer place.